VDO M6WL - Manual (Page 32)

32
M6
Settings – sensor selection
The M6 can display heart rate and (simultaneously)
cadence data.
To do this, a heart rate and/or cadence transmitter must be
available and installed. Use the sensor selection menu to
select the sensor that should be activated.
ATTENTION: once a transmitter has been selected,
the sensor values (heart rate/cadence) appear on the display.
The display changes.
The layout of the functions on the buttons also changes.
Further information on this is provided on page 71 for the
heart rate option and on page 76 for the cadence option.
How to select the sensors:
Press and hold the
SET button until the settings menu opens.
Press the BIKE button to move from Memory to Settings.
Press the SET button to open the setting.
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the sensors.
Press the SET button to open the settings.
Heart rate OFF or ON flashes.
Press the
BIKE or TPC button to select ON or OFF.
Press the SET button to confirm the selection.
You can now select whether the cadence transmitter
should be activated.
Press the BIKE or TPC button to select ON or OFF.