VDO WL MC 2.0 - Manual (Page 43)

IT NL PL FR ES ENG DE
www.vdocyclecomputing.com MC 2.0 WL 43
Stopwatch indicator
Shows that the stopwatch is still running whilst other information is
provided on the display.
Indicator bike 1/bike 2
The computer can use two different settings for two bikes.
The indicator shows which of the two bikes you have chosen to use.
The total distance is measured and stored separately for bike 1 and
bike 2.
Measurement unit (KMH or MPH)
The computer can display both KMH and MPH. Distances are
correspondingly displayed in kilometers or miles. The indicator
shows the selected measurement unit
Difference indicator – speed (current) to speed (average)
The computer compares the current speed with the average speed.
The indicator shows whether the current speed is
B greater than the average speed (+1 km/h)
B less than the average speed (-1 km/h)
B or the same as the average speed (tolerance +/- 1 km/h)
Menu prompt indicator
When a submenu has been accessed, these indicators flash and show
that there are other selection options or that the computer is waiting
for an entry (setting mode).
Display backlight
The LIGHT ICOn indicates if the backlight-mode has been switched on.
Heart rate/cadence indicator
The indicator shows whether you have chosen the heartrate or the
cadence sensor.
Zone indicator
The zone indicator shows whether your heart rate or cadence
are within the set training zone.
B Up arrow: heart rate/cadence below the lower limit
B Down arrow: heart rate/cadence above the set upper limit
B Both arrows: heart rate/cadence within the set training zone