VDO WL MC 2.0 User Manual
Page 65
IT
NL
PL
FR
ES
ENG
DE
www.vdocyclecomputing.com
MC 2.0 WL 65
CLOCK---SET MInUTES appears on the display.
Press ALTI
A
to reduce the value or
P
to increase
it. Once you have set the correct value, press
M
to
confirm your setting.
CLOCK––SET OK? query.
Press
M
in confirmation.
The MC 2.0 confirms by displaying CLOCK--SET DOnE.
To exit settings mode, press and hold the
C
button for three seconds.
SETTInGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
This area enables you to set the total distance cycled. The information
is separately provided for bike 1 and bike 2. At the start of the season,
you can reset the total distance cycled to zero, for example.
ATTENTION: the total distance is SAVED when the battery is
changed. The data is not lost.
Process:
Press and hold
M
for three seconds. SETTInGS--OPEn? flashes.
LAnGUAGE---SELECT---appears on the display.
Press
P
to scroll to ODOMETEr---SET---.
Press
M
in confirmation.
6.7. Setting the total distance
ODOMETEr ODO BIKE 1 or ODO BIKE 2 is shown on
the display.
Press ALTI
A
or
P
to make a selection.
Press
M
in confirmation.
ODO BIKE 1 (or 2)--SET KM or SET MILE is shown on
the display.
The first digit flashes.
Press ALTI
A
to reduce the value or
P
to increase
it. Once you have set the correct value, press
M
to
confirm your setting.
The second digit now flashes.
Press ALTI
A
to reduce the value or
P
to increase
it. Once you have set the correct value, press
M
to
confirm your setting.
Continue the setting process until all digits have
been set.