VDO WL MC 2.0 - Manual (Page 45)

IT NL PL FR ES ENG DE
www.vdocyclecomputing.com MC 2.0 WL 45
A = ALTI
In function mode:
B Altitude information is displayed.
B If the submenu is open:
Scroll down in the submenu.
B Press and hold ALTI for three seconds:
Opens the menu for recalibrating the current altitude.
In setting mode:
B Scroll down within the setting modes.
B Decrease a digit.
P = P/CAD
In function mode:
B Displays the heart rate information and the stopwatch
(if heart rate has been paired).
B Or:
Displays the cadence information and the stopwatch
(if cadence has been paired).
B If the submenu is open: Scroll up in the submenu.
B Press and hold Hr/CAD for three seconds:
Opens the menu for selecting the heart rate training zone
(if heart rate transmitter has been paired).
In setting mode:
B Scroll up within the setting modes.
B Increase a digit.
= BIKe
B Displays the bike functions, e.g. trip distance, average speed etc.
+ M = BIKe+MeNU
B Press the buttons BIKE+MEnU (hold for three seconds) to open
the menu for selecting the transmitter for heart rate or cadence.
A + P = ALTI+P
B Press the buttons ALTI+P to start/stop the stopwatch.
B The stopwatch immediately appears on the display and
is started or stopped.
+ C = BIKe+CLeAR
B Press the buttons BIKE+CLEAr to activate the display backlight.
B When the display backlight is activated, the LIGHT icon is
displayed.
B When the display backlight is activated, the display is lit for a few
seconds every time a button is pressed.
ATTENTION: press the buttons BIKE + CLEAR again to switch off the
display backlight during the day.
This SAVES BATTERY POWER.