VDO WL MC 2.0 - Manual (Page 44)

MC 2.0 WL VDO CYCLECOMPUTING 44
DE ENG FR ES IT NL PL
C = CLeAR
A = ALTI
M = MeNU
P = P/CAD
BIKe
Menu indicators on the display flash to show that there are other
selection options. In function mode, the computer is operated using
five buttons. In setting mode, the computer is operated using four
buttons.
2. Operation
To make your computer easy to use, we have developed the EMC =
Easy Menu Control system. The EMC makes your computer easier to
operate by means of full-text menu guidance, as is used on most
mobile phones.
FUNCTION 3
FUNCTION 4
FUNCTION 5
FUNCTION 6
C = CLeAR
In function mode:
B Jump back a menu level from the submenu.
B Press and hold C for three seconds:
B reset trip data to zero.
B reset stopwatch to zero.
B reset navigator to zero.
In setting mode:
B Press and hold C for three seconds:
Exit the settings menu,
return to function mode.
B Correct an entry.
B Jump back a digit.
M = MeNU
In function mode:
B Access available submenu.
You can recognise a submenu by
the flashing menu indicators.
B Confirm selection.
B Start/stop the stopwatch.
B Press and hold M for three seconds:
B Open the settings menu.
In setting mode:
B Select a setting.
B Confirm a setting.
B Confirm a selection made.
A = ALTI
In function mode:
B Altitude information is displayed.
In setting mode:
B Scroll backwards in the menu.
B Decrease the number to be set.
P = P/CAD
In function mode:
B Heart rate information
or
B Cadence information
In setting mode:
B Scroll forwards in the menu.
B Increase the number to be set.
= BIKe
In function mode:
B Bike functions