VDO WL MC 2.0 - Manual (Page 54)

MC 2.0 WL VDO CYCLECOMPUTING 54
DE ENG FR ES IT NL PL
3.12 Auto-starting/stopping the computer
Press M to confirm the ALTITUDE--ACTUAL ALTI
setting.
ACTUAL ALTI--ALTITUDE or
ACTUAL ALTI--AIr PrESSUrE
is displayed.
A selection is made by pressing the
P or ALTI
button A .
Confirm the selection by pressing M .
The digit to be set flashes.
Pressing P/CAD
P or ALTI A increases or reduces
the digit.
The following query then appears:
ACTUAL ALTI--SELECT OK?
Confirm the selection by pressing
M .
The MC 2.0 confirms by displaying ACTUAL ALTI –
SET DOnE.
3.11 Selecting the start altitude / recalibrating the actual altitude
The MC 2.0 can work with two different start altitudes (example: home
altitude and altitude at holiday location). The current altitude can be
set by entering the number of METErS or the AIr PrESSUrE. Please
also read section 6.10.
START ALTITUDe
B Press and hold the ALTI button A for three seconds.
B ALTITUDE SELECT? flashes on the display.
B ALTITUDE
B ACTUAL ALTI
B HOME 1
B HOME 2
is displayed (depending on the previously accessed configuration).
B A selection is made by pressing ALTI A or P/CAD P .
B The selection is confirmed by pressing M .
B For the start altitudes, the query 300 appears (numerical example).
B HOME ALTI 1 (or 2) SELECT OK ?
B The selection is confirmed by pressing MEnU.
B The MC 2.0 confirms by displaying ALTITUDE DOnE.
ACTUAL ALTITUDe
ACTUAL ALTITUDE can be used to re-calibrate the current altitude.
This can be done by entering the (known) altitude in METErS or the
AIr PrESSUrE. The sea level pressure can be found online on weather
forecast websites.