Vortech 1996-2004 Ford 4.6 Mustang GT - Manual (Page 2)

P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12APR08 v3.0 MusGT Bull(4FLv3.0)
ii
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general automotive
mechanic knowledge and experience. Please browse through each step
of this instruction manual prior to beginning the installation to determine
if you should refer the job to a professional installer/technician. Please
contact your dealer or Vortech Engineering for possible installers in your
area.
2. This product was designed for use on stock (un-modified, OEM) vehicles. The PCM
(computer), engine, transmission, drive axle ratios and tire O.D. must be stock. If the
vehicle or engine has been modified in any way, check with Vortech prior to
installation and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard
use (no boost) until the problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage.
Exclusions from Vortech warranty coverage considerations include, but not limited
to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but not
limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM
programming or other such changes.
©2008 VORTECH ENGINEERING, LLC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated
into another language in any form, by any means without written permission of Vortech Engineering, LLC.
T
his manual provides information on the installation, maintenance and service of
the Vortech supercharger kit expressly designed for this vehicle. All information,
illustrations and specifications contained herein are based on the latest product
information available at the time of this publication. Changes to the manual may be
made at any time without notice. Contact Vortech Engineering for any additional
information regarding this kit and any of these modifications at (805) 247-0228 8:00am-
4:30pm PST.
STOP