Vortech 1996-2004 Ford 4.6 Mustang GT User Manual
Page 29
I.
Route the Vortech supplied accessory drive belt
around all engine pulleys except for the water
pump pulley. Lower the supercharger/bracket
assembly into place and route the belt around the
supercharger pulley and the relocated factory
idler. (See Figs. 8.2-e, 8.2-f.) Insert the alternator
spacer and secure the supercharger/bracket
assembly with the supplied fasteners per diagram.
Use locking pliers to release the belt tension. Push
the belt over the top radius of the water pump
pulley and release the tensioner.
Fig. 8.2-e
Fig. 8.2-f / Belt Diagram
NOTE: The new, longer accessory drive
belt is routed the same as the
original belt except for the
accommodation of the
supercharger and idler pulley.
Should an emergency arise, the
factory belt may be reinstalled in
it's original configuration.
8.2 MAIN BRACkET ASSEMBLY (2000-2004 MODELS ONLY), CONT’D.
SUPPLIED
PLASTIC
IDLER
RELOCATED
FACTORY
IDLER
(SMOOTH)
VORTECH
IDLER
(RIBBED)
S/C
ALT.
WATER
PUMP
POWER
STEERING
A/C
CRANK
TENSIONER
“OPEN” SIDE OF PULLEY MUST BE INSTALLED
TOWARD THE ALTERNATOR
REPLACE WITH THE
SUPPLED FLANGED
PULLEY (4FH016-150)
(4FL116-150)
NOTE: IT MAY BE NECESSARY TO FILE
THE WEBBING BEHIND THE
PULLEY TO ALLOW FOR CLEARANCE
OF THE SUPPLIED FLANGED PULLEY.
P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12APR08 v3.0 MusGT Bull(4FLv3.0)
18