Radiator – Vortech 1996-2004 Ford 4.6 Mustang GT User Manual
Page 30
P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
14APR08 v3.0 MusGT Bull(4FLv3.0)
J.
Secure the air conditioning silencer and the
oil drain hose to the mounting bracket
using the adel clamp, #10 bolt and washer.
(See Fig. 8.2-g.)
*K. Route the oil drain hose down to the oil pan
tube previously installed. The hose must be
routed downhill, free of dips and kinks. Trim
the hose end if necessary, slide the hose
onto the drain tube and secure it with a #8
hose clamp. Support the fitting in the oil
pan with a wrench while tightening the
drain tube fitting.
*L. Route the oil feed hose next to the drain
hose, down to the feed fitting and secure.
A.
Trim 1" of hose from the radiator end of the
upper radiator hose (straight portion). (See
Fig. 9-b.) Cut the radiator hose, into 2
pieces in the middle of the upper straight
section.
B.
Install the supplied stainless steel radiator
tube into the separated radiator hose and
secure with the supplied clamps. Reinstall
radiator hose, and refill radiator (see Fig.
9-a).
Fig. 9-a
Fig. 8.2-g / Air Conditioning Silencer
Fig. 9-b
NOTE: Minor bending of the air
conditioning lines may be
necessary.
8.2 MAIN BRACkET ASSEMBLY (2000-2004 MODELS ONLY), CONT’D.
9. COOLANT HOSE MODIFICATION
RADIATOR
TRIM 1”
SUPPLIED TUBE
* Applies to "engine oil-fed" units only. V3 applications skip these steps.
P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
14APR08 v3.0 MusGT Bull(4FLv3.0)
19