Vortech 1996-2004 Ford 4.6 Mustang GT - Manual (Page 28)

P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
14APR08 v3.0 MusGT Bull(4FLv3.0)
NOTE: When mounting the supercharger bracket assembly to the front
cover, make sure the wiring harness support bracket is sandwiched
in-between the timing cover and the Vortech aluminum bracket in
position #1. (See Fig. 8.2d.)
Fig. 8.2-d / Supercharger-Front View
8.2 MAIN BRACkET ASSEMBLY (2000-2004 MODELS ONLY), CONT’D.
SUPPLIED SPACER
(2.249"- GT Models
/2.049" Bullitt
Models) MUST BE
SANDWICHED
BETWEEN THE
ALTERNATOR AND
SUPERCHARGER
MOUNTING BRACKET
VORTECH MOUNTING
BRACKET
6mm x 50mm
BOLT & WASHER
ENLARGE TO 27/64"
10-24 x 1/2" BOLT AND WASHER
OIL DRAIN
HOSE (Oil-fed
models only
8mm x 140mm
BOLT & WASHER
ADEL CLAMP
AIR CONDITIONING
SILENCER BRACKET
(SANDWICH TABS BETWEEN
ENGINE COVER AND TIMING
SUPERCHARGER BRACKET)
2001-2004 MODELS - USE
THE
SUPPLIED 10mm x .06 THICK
WASHER IN THIS POSITION
1999-2000 MODELS -
10mm x 140mm BOLTS AND
WASHERS
2001 MODELS - 8mm x 140
BOLTS & WASHERS
#1
P/N: 4FL020-010
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
14APR08 v3.0 MusGT Bull(4FLv3.0)
17