Install autopilot, Gps led indication – XAIRCRAFT FC1212-P User Manual
Page 10
Advertising
7 / 36
Install Autopilot
Autopilot can connect with any port of Port A ~ Port E on FC1212-P through 6 pin cable.
Notice:
1. Have to work with Compass.
2. GPS should install higher than other electric devices, far away from UBEC ,RC, Video Transmitter or other
devices to avoid interference on GPS signal.
3. Don't use GPS between buildings.
GPS LED Indication
Light
Flash Mode
Indication
Red
Fast Flash
Flight mode is Normal mode
Flash in one second
Flight mode is Attitude mode
Flash in five seconds
Flight mode is GPS Attitude mode
Green
Fast Flash
No satellite or less than 4 satellites connected.
Flash in one second
Low Accuracy GPS Attitude mode, 4-6 satellites connected.
Advertising