XAIRCRAFT FC1212-P - Manual (Page 22)

19 / 36
X.BUS Input
Not Released yet.
Gimbal Settings
Gimbal Remote Control Input
Input 9 and Input 10 of FC1212-P are for gimbal, respectively controlling pitch angel and shuttle action. After
connected, signals shown in the Gimbal Input.
Turn OFF/ON Gimbal Auto-compensation by Transmitter
Gimbal auto-compensation is enabled by default. You can configure a switch on transmitter to turn ON/OFF the
auto-compensation in AUX function. The picture shows a switch channel connected to Input7, and shows the state
of auto-compensation disabled.