Motor power on type, How to use aux functions – XAIRCRAFT FC1212-P User Manual

Page 21

Advertising
background image

18 / 36

Motor Power On Type

1. Normal: Throttle up to a certain level, the motors start. Throttle down to minimum after 0.5 second, the

motors stop.

2. Arming: Throttle at minimum level, yaw to right to start the motors, yaw to left to stop the motors.

How to Use AUX Functions

You can configure the optional functions for your modules by assigning 3 position or 2 position switch. The switch
channel can be connected to any port of Input6, Input7 or Input8.

The picture shows a switch is connected with INPUT6. You can see the green signal switchover in Low, Mid and
High when you flipping the switch on transmitter.
For example the Return to Home function, choose High to enable the function. After setting saved, you will see the
state changing as below:
1. Return to Home is OFF.

2. Return to Home is ON.

AUX Tips

For saving the RX channels, you can configure one switch for different function.
For example, a 3-position switch can be configured as: Low for Carefree, Mid for nothing, High for Return to Home.

Advertising