XAIRCRAFT FC1212-P - Manual (Page 23)

20 / 36
Gimbal Settings
Note: FC1212-P does not support multi-circle servos. Multi-circle servo has no end-points.
Auto-compensation Settings
Angle Gain: For the roll and pitch of Gimbal, adjusting the gain can tune how much the servo compensates for
different servo.
Stick Speed Gain: Configure how fast the gimbal reacts to the pitch control from transmitter.
Max and Min: Configure the servo end-points.
Home: The original position of the servo.
Configure Shutter
Configure half-press (focus), press (shot) actions for the shutter.