Keep turning to one side during flight, Copter heading is not stable, How to use ubec – XAIRCRAFT FC1212-P User Manual

Page 35

Advertising
background image

32 / 36

Keep turning to one side during flight

1. Check the FC1212-P and Compass install direction.
2. Check the propeller install, to ensure the rotate direction is matched to the frame style, ensure all propellers

installed in horizontal line. Propeller will to the side may because the motor installation is not straight for
example the picture as below:

Copter Heading is not stable

Note: Copter heading keeps turning to left or right drift slowly is normal when there’s no compass plugged-in.
If compass plugged-in:
1. Check around compass if there’s any electric (electromagnet, magnetizer) interference, make the wires tidy. If

in the building may interference by steel reinforcement.

2. Redo the Compass calibration.

How to Use UBEC

When you mount more devices to FC, because the regulator on ESC can't supply enough power for all the

devices, you need a third part 5V UBEC to supply power.

For example, if you use a Camera Mount like CM130-TPS, the servos of the camera mount require an UBEC

which can supply at least 3A current.

Advertising