09 maintenance and specifications – Volvo 2013 XC70 User Manual

Page 332

Advertising
background image

09 Maintenance and specifications

Replacing bulbs

09

330

*

Option/accessory, for more information, see Introduction.

Introduction

All bulb specifications are listed on page 336.
The following bulbs should only be replaced by
a trained and qualified Volvo service techni-
cian:

Dome lighting, reading lights

Glove compartment lighting

Footwell lighting

Turn signals in the door mirrors

Approach lighting in the door mirrors

Brake lights/rear fog light/taillights

Rear parking lights

Active Bending Lights

LED bulbs

NOTE

For information regarding any other bulbs
not mentioned in this section, please con-
tact your Volvo retailer or a trained and
authorized Volvo service technician.

WARNING

The engine should not be running when
changing bulbs.

If the engine has been running just prior
to replacing bulbs in the headlight hous-
ing, please keep in mind that compo-
nents in the engine compartment will be
hot.

WARNING

Active Bending Lights* – due to the high
voltage used by these headlights, these
bulbs should only be replaced by a
trained and qualified Volvo service tech-
nician.

Turn off the lights and remove the
remote key from the ignition before
changing any bulbs.

Headlight housing

G010325

The entire headlight housing must be lifted out
when replacing all front bulbs.

CAUTION

Never touch the glass of bulbs with your fin-
gers. Grease and oils from your fingers
vaporize in the heat and will leave a deposit
on the reflector, which will damage it.

Advertising