Pilz PNOZ mmc2p seriell - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Gertebeschreibung_PNOZ mmc2p
The expansion module PNOZ mmc2p is used for communication of the
configurable safety relay PNOZmulti Mini via a serial interface RS 232.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul_Mini
The expansion module may only be connected to a base unit PNOZmulti
Mini from the modular safety system PNOZmulti.
Bestimmung/Gertebeschreibung_multi_System
The modular safety system PNOZmulti is used for the safety-related in-
terruption of safety circuits and is designed for use on:
` E-STOP equipment
` Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_multi_ nicht sicherheitsgerichtete Funkt
The expansion module may not be used for safety-related functions.
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
` Any component, technical or electrical modification to the product
` Use of the product outside the areas described in this manual
` Use of the product outside the technical details (see chapter entitled
“Technical Details”)
3.1.1 System requirements
System requirements 3- Systemvoraussetzungen PNOZ mmc2p ser ` PNOZmulti Configurator: From Version 7.1.0
` Base unit PNOZ mm0.1p: From Version 1.0