Pilz PNOZ mmc2p seriell - Manual (Page 17)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-1
5.1 General installation guidelines
5 Installation
5 5000 Installation Installation 5- 5.1 General installation guidelines 5100 General installation guidelines 5- Montage_Sigma_allgemein ` The unit should be installed in a control cabinet with a protection type
of at least IP54.
` Use the notch on the rear of the unit to attach it to a mounting rail.
` In environments exposed to heavy vibration or when installing on a
vertical mounting rail (35 mm), the unit should be secured using a fix-
ing element (e.g. retaining bracket or end angle).
` Push the unit upwards or downwards before lifting it from the mount-
ing rail.
Montage_multi_mini_Temperatur ` The ambient temperature of the PNOZmulti units in the control cabi-
net must not exceed the figure stated in the technical details, other-
wise air conditioning will be required.
Montage_EMV ESD
5.1.1 Dimensions
Dimensions 5- Abmessungen
CAUTION!
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure
against discharge before touching the product, e.g. by touching
an earthed, conductive surface or by wearing an earthed arm-
band.
120 (4.72")
100 (3,94") 22,5
(0.88")