Pilz PSSu H PLC1 FS DP SN SD - Manual (Page 15)

Function description
Operating Manual PSSu H PLC1 FS DP SN SD
1001776­EN­04 15
INFORMATION
The station address should only be set when the module is switched off (no
voltage applied).
The settings are only transferred when booting. Any changes made to the
settings during operation will not be transferred.
4.4 IP connections
Various Ethernet­based communication modes are supported (e. g. Modbus/TCP, Raw
UDP). Detailed information is available in the "System description PSS 4000".