Pilz PSSu H PLC1 FS DP SN SD - Manual (Page 3)

Content
Operating Manual PSSu H PLC1 FS DP SN SD
1001776­EN­04 3
Section 1 Introduction 5
1.1 Validity of the documentation 5
1.1.1 Retaining the documentation 5
1.2 Definition of symbols 5
Section 2 Overview 7
2.1 Module features 7
2.2 Front view 8
Section 3 Safety 9
3.1 Intended use 9
3.2 Safety regulations 9
3.2.1 Use of qualified personnel 9
3.2.2 Warranty and liability 10
3.2.3 Disposal 10
Section 4 Function description 11
4.1 Module features 11
4.1.1 Control system 11
4.1.2 Supply voltage 11
4.1.2.1 Function description 11
4.1.2.2 Current load capacity 11
4.1.3 Integrated protection mechanisms 12
4.1.4 SD card 12
4.1.5 Reset button 13
4.2 SafetyNET p 13
4.2.1 Connection to SafetyNET p 13
4.3 PROFIBUS DP 14
4.3.1 Connection to PROFIBUS DP 14
4.3.2 Selector switch for setting the station address 14
4.4 IP connections 15
Section 5 Installation 16
5.1 General installation guidelines 16
5.1.1 Dimensions 16
5.2 Installing the head module 16
Section 6 Interfaces 18
6.1 SafetyNET p 18
6.2 PROFIBUS DP 18
6.2.1 Connection to PROFIBUS DP 18
Section 7 Wiring 20
7.1 General wiring guidelines 20
7.2 Terminal configuration 20
7.3 Connecting the module 21
Section 8 Operation 22