Pilz PSSu E F PS2 - Manual (Page 28)

Technical details
Operating Manual PSSu E F PS2(­T)(­R)
1002237­EN­03 28
Environmental data 312192 314192 315192
Climatic suitability
In accordance with the
standard EN 60068­2­30, EN
60068­2­78 EN 60068­2­30, EN
60068­2­78
–
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C –
Condensation during op­
eration
Not permitted Short­term –
EMC EN 61000­4­2, EN
61000­4­3, EN 61000­4­4,
EN 61000­4­5, EN
61000­4­6, EN 61000­6­2,
EN 61000­6­4 EN 61000­4­2, EN
61000­4­3, EN 61000­4­4,
EN 61000­4­5, EN
61000­4­6, EN 61000­6­2,
EN 61000­6­4 EN 61000­4­2, EN
61000­4­3, EN 61000­4­4,
EN 61000­4­5, EN
61000­4­6, EN 61000­6­2,
EN 61000­6­4
Vibration
In accordance with the
standard
EN 60068­2­6 EN 60068­2­6 EN 50125­3
Frequency
10,0 ­ 55,0 Hz 10,0 ­ 55,0 Hz
10,0 ­ 55,0 Hz, 5,0 ­
2000,0 Hz
Amplitude 0,35 mm 0,35 mm 0,35 mm
Acceleration 1g 1g 0,23 g
Broadband noise
In accordance with the
standard
– EN 60068­2­64 EN 61373
Frequency – 5 ­ 500 Hz 5 ­ 150 Hz
Acceleration – 1,9grms 0,79 g RMS
Shock stress
In accordance with the
standard
EN 60068­2­27 EN 60068­2­27 EN 50125­3
Acceleration 15g 15g 2g
Duration 11 ms 11 ms 11 ms
In accordance with the
standard
EN 60068­2­29 EN 60068­2­29 EN 61373
Acceleration 10g 10g 5g
Duration 16 ms 16 ms 30 ms
Supply interruptions
In accordance with the
standard
– – EN 50155
Class – – S2, C1, C2
Max. operating height
above sea level
– 5000 m 2000 m
Airgap creepage
In accordance with the
standard
EN 60664­1 EN 60664­1 EN 50124­1
Overvoltage category II II OV2
Pollution degree 2 2 2