Nexen RSD100 964520 - Manual (Page 7)

 FORM NO. L-21107-H-0108
1.1 i
nStAllAtiOn
The RSD100 can be located near the pneumatic brake or clutch being controlled and can be mounted horizontally or
vertically. Provide enough clearance around the RSD100 to allow removal of the cover and the hold down screws.
NOTe: For best performance and reliability, locate the current or voltage to pressure converter near the brake or clutch.
Use a regulated clean air supply and a filter of 20 microns or less.
Figure 
CaUTION
Mount the RSD100 in a shock and vibration free area with an ambient temperature of
less than 140°F [60°C] and more than 32°F [0°C].
134.4
5.29
107.8
4.24
14.1
.56
5.8
.23
11.6
.46
43.8
1.72
21.7
.86
123.19
4.850
81.41
3.205
40.39
1.590
31.4
1.24
17.3
.68
145.7
5.74
11.6
.46
27.7
1.09
6.6
.26
14.3
.56
37.6
1.48
45.0
1.77
55.4
2.18
Cable not shown
Cable Length 2 m
78 in
2x
O 6.60
.260 Mounting Holes
1.0 INSTaLLaTION / CONNeCTIONS
Communication Cable 1.5 m [59 in]
(Not Shown)