Operation, Edge position control (epc), Center position control (cpc) – Nexen Size 18 964102 User Manual

Page 6

Advertising
background image

6

FORM NO. L-20245-C-1099

OPERATION

Edge Position Control (EPC)

1.

Set the Mode Switch to CENTER (See Figure 6).

2.

Set the Fine Adjustment Control to 5.00 (mid-travel)
(See Figure 6).

3.

Thread the web into the machine.

4.

Set the Photo Head Selector Switch to LEFT or RIGHT
as appropriate (See Figure 6).

5.

Set the Mode Switch to MAN (See Figure 6).

6.

Operate the machine at slow speed.

7.

Using the Manual Push Buttons, align the web to the
centerline of the machine (See Figure 6).

8.

Loosen either the right or left Knob (depending on which
Photo Head was selected in Step 4) and move the right
or left Photo Head, Bracket, and Sensor Bracket Mounting
Block to the edge of the web until the center green light
on the Error Indicator Array glows (See Figures 6 and 7);
then, tighten the Knob to secure the Photo Head.

9.

Set the Mode Switch to AUTO (See Figure 6).

10. Accelerate the machine. The web should remain in the

center of the Photo Head and the green light on the Error
Indicator Array should stay on.

11. If the web is misaligned with the centerline of the machine,

it can be moved with the Fine Adjustment Control located
on the control panel (plus or minus 0.20" [5 mm] (See
Figure 6).

MODEL
AE120

MAN

CENTER

AUTO

AUTO

POWER

ON

LEFT

CPC

RIGHT

MAN

FIGURE 6

FIGURE 7

Center Position Control (CPC)

1.

Set the Mode Switch to CENTER (See Figure 8).

2.

Set the Fine Adjustment Control to 5.00 (mid-travel)
(See Figure 8).

3.

Thread the web into the machine.

4.

Set the Mode Switch to MAN (See Figure 8).

5.

Operate the machine at slow speed.

6.

Using the Manual Push Buttons, align the web with the
centerline of the machine.

7.

Set the Photo Head Selector Switch to LEFT (See Figure
8).

8.

Loosen the left Knob and move the left Photo Head,
Bracket, and Sensor Bracket Mounting Block to the edge
of the web until the center green light on the Error
Indicator Array glows (See Figures 8 and 9); then,
tighten the Knob to secure the Photo Head.

MODEL
AE120

MAN

CENTER

AUTO

AUTO

POWER

ON

LEFT

CPC

RIGHT

MAN

FIGURE 8

Power

Switch

Error Indicator

Array

Photo Head

Selector Switch

Manual

Push

Buttons

Fine

Adjustment

Control

Auto

Indicator

End of

Travel

LED

Mode

Switch

Left Photo Head,

Bracket, and

Sensor Bracket

Mounting Block

Right Photo Head,

Bracket, and

Sensor Bracket

Mounting Block

Knob

Photo Head

Selector Switch

Manual

Push

Buttons

Fine

Adjustment

Control

Mode

Switch

Error Indicator

Array

Advertising