Lenco CS-430 BT - Manual (Page 7)

6
RADIO OPERATION:
1. To select radio band
Press BAND or BND button briefly and repeatedly to select a desired radio band in sequence and
circulation as follows:
-->FM1-->FM2-->FM3-->MW1-->MW2--> .
2. To search for radio station manually or automatically
Press >>| or |<< button briefly to manual tune up/down for your desired radio stations step by step.
Press and hold >>| or |<< button for 0.5 seconds, to automatically tune up/down for a radio station of
strong signal.
You can also press SCN button on remote control to automatically tune up for a radio station of
strong signal.
3. To store current station or turn on a preset one
1) Press one of the 6 number buttons and hold for more than 1 second to store the current station in
the preset memory bank of the number button for the current band.
In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory
bank of the number button for the current band.
* When PTY mode is on, the 6 number buttons are shared as follows:
PTY music group --------------------- PTY speech group
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
4. To scan for each preset station or auto search for the strongest stations
1) When pressing and holding AS/PS or A.P button for more than 1 second, the radio searches from the
current frequency and checks the signal strength level until the 6 strongest stations are found. And
then the 6 strongest stations are preset to the corresponding preset memory numbered bank. The
auto-storage operation is implemented in the each selected band. When the auto-storage operation is
finished, the radio executes Preset scan.
2) When pressing AS/PS or A.P button briefly, the radio searches for each preset station in the current
band and holds at that preset station for 5 seconds while releasing mute, and then searches again.
5. To search for stations with a PTY (PROGRAM TYPE) program
Press and hold BAND/PTY on main unit or press PTY button on remote control to select one of PTY
programs such as: POP M- - NEWS-- off. While selecting POP M or NEWS, pressing one of 6 preset
buttons briefly and repeatedly can select your desired PTY program as described in preset buttons.
When turning on a PTY program, the PTY program and PTY word is flashed on LCD.
After selecting a desired PTY program and no operation for 2 seconds, it will search for the station of
the PTY program. During 1 loop, if the desired station of the PTY program is not found, PTY NONE is
displayed, then returns to previous normal radio and PTY icon disappears.