Lenco CS-430 BT - Manual (Page 9)

8
USB/Card OPERATION:
1. To insert or pull out SD card or USB stick
When needing to playback SD or USB music, remove front control panel or open the cover of USB
socket, then insert an SD card or USB stick into the card slot or USB socket. Then the playing mode
will be changed into SD or USB mode and display Card or USB on LCD (When SD card and USB
stick are both inserted into the slot or socket, the playing mode will be changed into the mode of the
latter one), and then play the first track of SD or USB.
2. To select next or previous track to play
Press >>| or |<< button to select next or previous track to play.
3. To play fast forward or backward
Press and hold >>| or |<< button to play fast forward or backward.
4. To play previous or next 10th track
Press 5/-10 or 6/+10 button to play previous or next 10th track.
Press and hold the +10/-10 to select the next or previous folder to be play.
5. How to use 1/>||/TOP button
During playback, press 1/>||/TOP button to pause playback. When in pause mode,
press 1/>||/TOP button to play again.
Press and hold 1/>||TOP button to select the first track for playback.
6. To scan tracks
During playback, press INT button briefly to play the first 10 seconds of each track, press INT button
again to cancel INT function and retain playing the track currently selected.
7. To repeat track(s)
During playback, press RPT button briefly to play the current track repeatedly, and the LCD will
display RPT ONE.
Press RPT button twice to play the tracks in the Album repeatedly, and the LCD will display RPT
ABM.
Press RPT button thrice to cancel RPT function, and the LCD will display RPT OFF.
8. To play tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM
function.
9. To quickly select a track to play
During playback, press the AS/PS button , it is activated selecting song mode, and the TRK 000
(if the number of tracks is less than 100 and more than 9, it will be TRK 00) will be visible on the
LCD display and the hundreds digit 0 that the MP3/WMA disc, SD card or USB contains will flash.
Rotate the VOL knob to select and enter the number on the flashing digit place from 0 to 9.
Then press the AS/PS button to confirm the entered number and the 0 on the tens digit will be
flashing.
Rotate the VOL knob to select and enter the number on the flashing digit from 0 to 9.
Then press the AS/PS button to confirm the entered number and the 0 on the units place digit will be
flashing.
Rotate the VOL knob to select and enter the number on the flashing digit from 0 to 9.
After finishing enter all the number of the song serial number on the flashing digit, press the SEL
button to play the corresponding track.
During playback, press and hold the -10,+10 to select the previous or next folder to be play.