Lenco IPD-4600 - Manual (Page 15)

Sleep to timer
1.
2. Tune to a desired radio station (radio mode), play a song from docked iPhone /
iPod (iPhone/iPod mode) or play music of an external device connected to AUX
(AUX mode).
3.
4.
Note :
To check the sleep time status, press the SLEEP button once.
If you are falling asleep to music from an external device connected to the AUX
input, the sleep timer will shut off the power to this system but it will not turn off the
Press button from the main unit or the STANDBY button from the remote
control to turn on the unit.
To select the sleep timer to turn the unit off after 15, 30, 45, 60, 90 or 120 minutes,
press the SLEEP button from the Remote Control repeatedly. The selected
sleep time and sleep indicator " " blink. The unit plays for the selected
time then automatically turns off.
To turn the unit off before the sleep timer counts down to zero, press the
Minutes.The unit shuts off automatically when the time expires.
Sleep Timer Function
This feature allows you to fall asleep to the FM radio or iPhone/iPod music for up to 120
Care and Maintenance
-Do not subject the unit to excessive force, shock, dust or extreme temperatrue.
-Do not tamper the internal components of the unit.
-Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be
-Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
-Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
button from the main unit or the STANDBY button from the remote control at
any time.
length of
external device.
used.
z
z
z
z
z z
If the unit experiences a power surge or electric shock, it is possible that the internal
micro-controller may lock up and the unit will not respond to any commands from the
panel controls.
1.In this event,unplug and then reconnect the AC power plug into the wall outlet.
Resetting the Unit
15