Lenco LED-2217 - Manual (Page 16)

15
INSTALLATION MENU OPERATION
INSTALLATION GUIDE
When powering up f rst time the Installation Guide
Will appear on screen.
Choose the language using buttons and then press
OK
Choose the service to install using the buttons and
then press ok.
You will now see the quick-start menu. Ensure that your
signal cable is connected to the TV and press OK 2 times.
The TV will now install the chosen service and tune all
available channels.
You can only install one service at a time but you can re-
turn at any time to install additional services by pressing
the QUICKSTART button on the handset
ATV will install an Analogue Television cable service
DTV will install a Digital Terrestrial Television service
(DVBT)
During the channel search this menu is displayed show-
ing the progress.