Lenco LED-2217 - Manual (Page 19)

18
PROGRAMME EDIT
Use up/down keys to select program edit. Press OK or
Right button to enter the menu. Use up/down buttons to
navigate through the menu
Delete
Press the RED button to delete the highlighted channel, a
red circle will appear next to the channel name.
Press the RED button again to c lete.
Press the MENU to return to the main menu.
Move
Press to select the channel, press yellow button to
enter the move mode, then press to move the chan-
nel location, press yellow button again or press OK to
c
Press MENU to return to the main menu.
Skip
Press to select the channel you wish to skip.
Press the BLUE button, a logo will appear next to the
channel name and the channel will be skipped when you
scroll through the channels.
Press the BLUE button again on the highlighted channel
to disable the skip function. Press MENU to return to the
main menu.
Rename (Only available in ATV)
Modify current channel name.
Press the button to enter RENAME mode, then use
the buttons to change name. Press green button
again or press menu button to c
Signal Information
Only available in DTV mode, Signal Information includes:
channel /network/modulation/quality /strength.
Cl Information
When insert CI Module, display CI Information.
Dish Setup
1. If you do not hav xed dish aligned to Astra 19.2E
ted with universal LNB you will need to use this
section.
2. If you hav ed Dish aligned to a different Satellite
or with a different LNB you will need to use this sec-
tion.
3. If you have a motorised Dish with a DiSEqC rotator
and wish to tune more than one satellite you will need
this section.
4. If you are on a DiSEqC switch system you will need
this section.
rst 2 installations can be done by most people so
long as you know what satellite your dish is aligned with
ted with.
Installation of 3 & 4 require an experienced user or
engineer.
To set a different Satellite or LNB
Select Satellite mode, press MENU key, navigate down to
the Dish Setup option, press OK. You will see the Satellite
Dish Setup menu.
To set Multiple Satellites and LNBs (only possible
on multi-LNB dish, switch systems)
Use buttons to select the satellite to which your dish
is aligned. Press OK. An arrow will display against the
chosen satellite.
Press button to navigate to LNB section of the menu.
Select the LNB type and settings for your LNB. Press the
blue Key to search the satellite channels.
Press the Exit button and the button to select the sec-
ond satellite.
Use buttons to select the second satellite to which
your dish is aligned. Press OK. An arrow will display
against the chosen satellite.
FAV
Select a program, press FAV button to set or delete the
channel. program as the favorite