Lenco LED-2217 - Manual (Page 17)

16
TV SETTINGS Menu
All the above installations can also be accessed through
the Main Menu system. In the TV Settings menu.
To access the correct service you need the TV to be in the
correct mode, ATV, DTV, cable or Satellite.
Select the mode either from the handset or from the
source menu.
When you are in the correct mode, press Menu button on
the remote control and enter the TV Settings Menu
Press MENU button to display the main menu, use
left/right buttons to select EINSTELLUNGEN menu, press
OK or down button to enter the menu. Press MENU or up
button to return to the main menu.
NOTE: TV SETTINGS can only be selected under the ATV/
DTV/SATELLITE/CABLE modes, it is disabled whilst in all
other modes.
ATV / CABLE SETTINGS
DTV / DVB-T SETTINGS
SATELLITE / DISH SETTINGS
DIGITAL CABLE (DVBC) SETTINGS
Auto Scan
In the Auto Scan menu there are 3 options for you to se-
lect from: DVB Select type, Country and Tune Type.
Press / to select DVB Select type, Country and Tune
Type, press OK to start scanning.
If you select ATV+D rst 50% of the processing is
for ATV tuning, while the second 50% represent DTV tun-
ing. When ATV tuning, you can press MENU to Skip ATV
tuning and start DTV tuning or press EXIT to exit tuning.
During the channel search this menu is displayed show-
ing the progress.
DTV
Input Source
CADTV
SATELLITE
ATV
SCART
YPbPr
PC
HDMI
AV
USB