Lenco LED-4001 - Manual (Page 21)

EN 21
BASIC FEATURES
If you stop the tuning before it has
finished, the TV will report a no signal
error. This is normal because all previous
channel memory has been cleared before
tuning is carried out.
Manual Scan (DTV Mode)
Allows you to make manual fine tuning
adjustments to the channel under DTV mode.
1. Press the MENU button to display the
main menu. Press the buttons to select
Channel in the main menu, then press the
or OK button, it will highlight the first option.
2. Press the buttons to select Manual Scan
and then press the OK button. On the sub-
menu, select Digital Manual Scan and then
press the OK button.
Digital Scan
Press the
buttons to select the desired
channel.
Start
Press the
buttons to select Start and then
press the OK button to start tuning.
Manual Scan (ATV Mode)
Allows you to make manual fine tuning
adjustments if the channel reception is poor
under ATV mode.
1. Press the MENU button to display the
main menu. Press the buttons to select
Channel in the main menu, then press the
or OK button, it will highlight the first option.
2. Press the buttons to select Manual Scan
and then press the OK button. On the sub-
menu, select Analog Manual Scan and then
press the OK button.
Analog Scan
Displays the current frequency, press the
buttons to change the frequency.
Channel to Save
Press the
buttons to select Channel to Save,
press the buttons to select channel number
you want to store.
Color System
Press the
buttons to select Color System,
press the buttons to select: Auto / PAL/
SECAM.
Sound System
Press the
buttons to select Sound System,
press the buttons to select: DK/I / BG/L.
AFC
Press the
buttons to select AFC, press the
buttons to select On or Off.
Start
Press the
buttons to select Start, press the
buttons to start tuning.
Channel Management (ATV / DTV Mode)
Auto Scan
a n n e t n A e p y T r e n u T
Manual Scan
Channel Edit
Common Interface
Signal Informatio
CICAM Profile Edit
n
Move OK: Select MENU: Return EXIT: Exit
Channel
Auto Scan
Manual Scan
Channel Edit
Common Interface
Signal Informatio
CICAM Profile Edit
n
Move OK: Select MENU: Return EXIT: Exit
Channel
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip EXIT: Exit
Digital Scan
Start
Frequency
Strength
CH21
474.00 MHz
0
Move 0~9: Input MENU: Return EXIT: Exit
Digital Manual Scan
Adjust
Analog Scan
Channel to Save
Color System
Sound System
AFC
Start
420.25 MHz
CH001
Auto
Auto
Off
Move 0~9: Input MENU: Return EXIT: Exit
Analog Manual Scan
Fine tune