Lenco LED-4001 - Manual (Page 9)

EN 9
PREPARATION
Installing the Base Stand
WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.
‡ 1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
‡ 2. Fix the stand support to the TV
using the 6 pcs provided screws.
‡ 3. Fix the base stand to the TV using
the 5 pcs provided screws.
‡ 1. Lay the TV face-down on a flat,
cushioned surface to avoid damaging
or scratching.
‡ 2. Untighten the 6 pcs screws holding
the stand assembly and remove them.
‡ 3. Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
Removing the Stand for Wall-Mounting