Lenco PDR-03 - Manual (Page 6)

General Operation
5
Enter the menu setting interface
1. Press and hold the INFO/MENU button,
*when the <Station scan> appears in DAB mode, or
*when the <Audio setting> appears in FM mode,
press or button to find the <Main menu>.
2. Press ENTER button and then press / button to cycle through
the menu contents.
3. Select one content, press ENTER to enter the setting interface.
4. Press the INFO/MENU button to go back to the previous
interface. Factory Reset
To set the unit to original settings, enter the factory reset interface,
follow the tips (Press “ENTER” button), then the unit will restart.
SW Version
To check the software version of the system.
Store stations
It is possible to store up to 10 of your favorite stations. This will
enable you to access your favorite stations quickly & easily.
1. Listen to the station you would like to save.
2. Press the PRESET button. The screen displays:
3. Press or to select the desired preset number 1~10.
4. Press the PRESET button again to confirm.
Recall a stored station
Once you have saved the stations to the preset buttons, you can
recall by pressing the PRESET button. Then press or to select
the stored stations, and press ENTER to confirm.
Preset 1 empty
Sleep time setting (briefly press SLEEP button)
Enter the sleep time setting interface to select the sleep time:
sleep off/15/30/45/60/90 minutes.
Backlight
At power on mode, backlight will be on for around 10 seconds and
off. For any button pressing or volume changing, backlight will be
on and corresponding function will be triggered at the same time
when applicable, then backlight will be off around 10 seconds.