Lenco PDR-03 - Manual (Page 9)

General Operation
8
DRC (Dynamic range control)
This function enables the radio to reduce the dynamic range of
audio signal and adapts to be listened to the audio in noisy
environment.
Enter the menu and find the <DRC>, use / to select from:
DRC off, DRC low, or DRC high, press ENTER to confirm. DAB menu settings
Press and hold the INFO/MENU button, then press the / to
enter the <Main menu> in DAB mode.
Prune the station
When the radio has performed a scan in several locations, you may
find there are some stored stations that no longer receive. This
prune function automatically can remove them from the stored
station list.
Enter the menu, press / to find <Prune station>, then follow
the tips <Press “ENTER” to prune station> to press the ENTER
button.
Station order
Enter the menu, find <Station order>, press ENTER, then press
/ to select one of the station order: Multiplex, Alphanumeric,
Active, press ENTER to confirm selection.