Lenco PDR-03 - Manual (Page 8)

General Operation
7
(Set the Alarms)
to save the alarm 1. To set alarm 2, follow the steps of alarm 1.
7. To cancel the alarms, enter the alarm setting interface, press
ENTER button to select alarm off and then enter then SAVE
interface to save the alarm off setting.
Display information
Press the INFO/MENU button to check the information.
In FM mode, it displays:
Radio text, program type, signal strength, and date.
In DAB mode, it displays:
DLS information, program type, station name, date, frequency,
bit rate & mono/stereo, signal strength, signal error.
Ensemble/ Station name/Multiples
A multiplex/ensemble is a collection of radio stations that are
bundled and transmitted on one frequency. There’re national and
local multiplexes. Local ones contain stations that are specific to
that area e.g. MXR West.
NOTE: DAB-unlike normal radio, groups together several radio
stations and transmits them on one frequency.
DLS (Dynamic Label Segment)
Dynamic label segment is message the broadcaster may include
with their transmissions, such as music style.
Radio text
As with DAB, the broadcaster can include the station text that
displays the information about the current program. If radio text
information is not available, it will display: No Radio Text. If the
RDS (radio data system) is available, it will show the station
information provided by the station.