Lenco PODO-151 - Manual (Page 4)

Battery is in full
Note: Player continues to use battery power after it’s been turned off, if unit isn’t used for a while,
the battery might need to be charged.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (available separately)
b.
Connection and Charging:
Once you have connected player with computer / power charger, then you will see the
“Connect” screen appear on screen,
The level bars are running in battery status icon at the “Connect” screen. The battery is in
charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The USB port on most
keyboards does not provide enough power to charge the player. Connect player to a USB 2.0 port
on your computer only to prevent charge problem.
2. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media files and recorded
voice memos when necessary, and to charge the battery. Disconnect the player when you’re done.