Lenco SCDi-01 - Manual (Page 4)

Tun�ng � �A��IO �������n
1. Press the FUNCTION button repeatedly
until “TUNER” is shown.
2. Press the BAND / FOLDER button to
select the desired frequency band ( FM or AM ).
3. Press the F - SKIP or B - SKIP
button as many times as required to
tune into the desired station.
4. Press and hold the F - SKIP or B - SKIP
button for more than 1 second ,
scanning starts automatically and the tuner will stop
at the first receivable broadcast station .
5. To stop auto tuning, press the F - SKIP
or B - SKIP button again.
�OWE� �U��LY
U�ING HOU�E �U��ENT
Before use, check that the rated voltage of your unit matches
your local voltage.
Note: plug is used as the disconnect device.
the disconnect device shall remain readily operable.
U�ING BATTE�IE�
Disconnect the AC power cord from
the AC inlet of the unit. Battery power
is cut automatically by the cord while
it is connected.
Insert 8 UM-2 ( size C ) batteries.
battery door
When the volume decrease,
or the sound distorts,
replace all of the batteries
with new ones.
To AC socket
To AC outlet
GB 2
A��JU�TING THE �OUN��
Press volume +/- to adjust the volume level.
FO� ��IVATE LI�TENING
Plug headphones (ø3.5 mm stereo mini-plug) into the
PHONES jack. When headphones are plugged in, the
speakers will automatically be disconnected.
VOLUME
Press the POWER/ STANDBY button to turn the audio on. To change the audio mode between,
CD , UDISK , SD/MMC , IPOD , AUX and TUNER, press the FUNCTION button while the power is on.
The audio mode will be displayed.
Power will be cut off automatically when the CD, MP3 and USB functions are in stop mode for
15 minutes.
TU�N ON / OFF THE �Y�TEM
����c��ng FM �������/M��n�� m����
1. To select FM stereo/mono mode, press the STEREO/
MONO button on the remote control.
2. The “STEREO” icon will be on when the received
station is broadcasted
in Stereo.
3. To select mono mode, press STEREO / MONO button
again.
4. The “STEREO” icon will never turn on in FM MONO
mode.
TUNE� O�E�ATION
VOLUME
battery door
Insert 3 LR03 ( size AAA ) batteries.
Back up Batteries for the clock
FUNCTION
BAND/FOLDER/
I-MENU
FUNCTION
SCDI-01 LENCO ENGLISH IM NO RCA 4 4 15/6/2011 14:48:21