Lenco SCDi-01 - Manual (Page 5)

1. Tune to a desired radio station.
2. Press the PROGRAM / MEMORY / CLK - ADJ. button to enter tuning saving mode.
The “MEMORY” icon will be on.
3. Program number “01” will be flashing on the left hand side.
4. Within 10 seconds, press the RANDOM/P- or REPEAT/P+ button to select the
desired program number.
5. Press the PROGRAM / MEMORY / CLK - ADJ . button to confirm.
6. If there is no button pressed within 10 seconds, it will exit tuning save mode and the
“MEMORY” icon will be off.
TO �KI� TO THE BEGINNING OF A T�A�K
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed twice during playback, the previous track will start again.
• When the button is pressed once during playback, the next track will be played.
CD display MP3 display
WMA display USB display
�A��IO MEMO�Y FUN�TION
�OM�A�T ��I�� �LAYBA�K
1. Press the FUNCTION button
repeatedly until “CD” is
shown on display.
2. Lift the CD door up, by pressing at the right side of the
CD door.
3. Insert a disc with the label
side facing up.
4. Close the CD door, the disc will rotate.
For CD : The total tracks of the disc will show on the
display.
For MP3/WMA/USB : The total tracks of the disc and
the total number of the folders will be shown on the
display.
CD display
GB 3
TO �TO� �LAYBA�K
Press the STOP button.
For CD : The total number of tracks and time will be shown.
For MP3 : The total number of tracks and folder will be shown.
For WMA : The total number of tracks and folder will be shown.
For USB : The total of tracks and folder will be shown.
For CD : Track number "001" & "CD" will be shown, the
time of the track "00:00" will flash, during normal
compact disc playback.
For MP3 : Track number "001" & "MP3" will be shown,
the time of the track "00:00" will flash, during
MP3 playback.
For WMA : Track number "001" & "WMA" will be shown,
the time of the track "00:00" will flash, during
WMA playback.
For USB : Track number "001" & "USB" will be shown,
the time of the track "00:00" will flash, during
USB playback.
TO INTE��U�T �LAYBA�K
Press the PLAY/PAUSE button. Press the button
again to resume playback.
5. After disc reading is finished, the disc will be played
automatically. In stop mode, press the PLAY /
PAUSE button to play the track.
For CD : Track number "001" & "CD" & "00:00" will be
shown, during normal compact disc playback.
For MP3 : Track number "F01" & "MP3" & "00:00" will
be shown, during MP3 playback.
For WMA : Track number "F01" & "WMA" & "00:00" will
be shown, during WMA playback.
For USB : Track number "F01" & "USB" & "00:00" will
be shown, during USB playback.
CD display MP3 display
WMA display USB display
FUNCTION
FO� BETTE� �E�E�TION
FM AM
PROGRAM /
MEMORY /
CLK-ADJ.
F - SKIP
B - SKIP
SCDI-01 LENCO ENGLISH IM NO RCA 5 5 15/6/2011 14:48:21