Altera High-Speed Development Kit, Stratix GX Edition User Manual
Page 77
Altera Corporation
Quartus II Version 3.0
5–33
Perform the Production Diagnostic Tests
Nios-Based Tests
Figure 5–24. Installed Compact Flash Card
3.
Change the programming file for the Stratix device to the
cf_1s40.sof
file. Wait until the checksum field is updated.
4.
Turn on the Program/Configure option for the Stratix device.
5.
Click Start. When configuration is complete, the S_CONF_DONE
LED illuminates.
6.
Choose Programs > Altera > SOPC Builder <version> > SOPC
Builder SDK Shell
(Windows Start menu).
1
This shell may be named Nios SDK Shell in older versions
of the Nios embedded processor.
7.
Change to the Nios SOFs directory by typing the following
command:
cd /Stratix_GX_kit/Test_designs/Nios_test_designs/
Nios_sofs
r
8.
Type
nr -t
r to open a terminal window that connects to COM 1.
9.
Press the Enter key twice in the terminal window. You should be at
a Nios prompt.