TOYOTA 2010 Camry - Manual (Page 483)

460
5-2. Steps to take in an emergency
Replacing an aluminum wheel with an aluminum wheel
Turn the nuts until the washers
come into contact with the disc
wheel.
Lower the vehicle.
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
For vehicles with a steel wheel,
reinstall the wheel ornament.
Align the cutout of the wheel
ornament with the valve stem
as shown.
Disc wheel
Washer
STEP 3
STEP 4
STEP 5