TOYOTA 2010 Prius - Manual (Page 230)

204
2-2. Instrument cluster
■
Returning to the previous screen
Select “EXIT” on the screen by
pressing the “DISP” switch, and
press and hold the “DISP”
switch.
The screen will revert to the
“SETTINGS” screen.
■
System check display
After switching the “POWER” switch to ON mode, “PRIUS” is displayed
while system operation is checked. When the system check is complete, the
normal screen will return.
■
Vacuum fluorescent display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of vacuum fluorescent displays, and there is no problem to
continue using the display.
■
Eco Driving Indicator Light
This indicator will not turn on if the following conditions are met while driving:
●
The shift position is anything other than “D”.
●
The driving mode is set to power mode or EV-Drive Mode.
■
5-minute interval/1-minute interval fuel consumption display
If the “POWER” switch is turned OFF, average fuel consumption and regen-
erated energy data will be reset.
■
Odometer/trip meter/distance to empty
The odometer/trip meter/distance to empty will not be displayed while the
fuel consumption history is being displayed.