Downhill assist control system (4wd models only) – TOYOTA 2010 Highlander User Manual
Page 208
Advertising

225
2-4. Using other driving systems
2
Wh
en drivin
g
Downhill assist control system (4WD models only)
While the downhill assist control system is operating
The slip indicator will flash to
indicate that the downhill assist
control system is operating, and
the stop lights and high mounted
stoplight will turn on.
With the downhill assist control system, the vehicle is able to
descend a steep hill, maintaining a constant low speed of about 3
mph (5 km/h) without brake pedal operation.
■
Activating the downhill assist control system
Press the “DAC” switch.
The downhill assist control sys-
tem indicator will come on to
indicate that the downhill assist
control system is activated.
Pressing the switch again turns
the system off.
Advertising