TOYOTA 2010 Highlander User Manual

Page 423

Advertising
background image

443

4-3. Do-it-yourself maintenance

4

Mainten

ance an

d ca

re

■

How to read oil container labels

Some oil containers are labeled with ILSAC certification marks that
help you to select the proper oil.

Oil identification mark

The ILSAC (International Lubri-
cant Standardization and
Approval Committee) Certifica-
tion Mark is added to some oil
containers to help you select the
oil you should use.

■

Engine oil consumption

●

The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.

●

More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.

●

A new engine consumes more oil.

●

When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.

●

Oil consumption: Max. 1.1 qt./600 miles, 0.9 Imp. qt./600 miles (1.0 L per
1000 km)

●

If your vehicle consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600
miles (1000 km), contact your Toyota dealer.

■

Changing the engine oil (U.S.A. only)

To reset the oil change system, follow the procedure below:

Vehicles without smart key system

Set the engine switch to the “LOCK” position with the trip meter A
reading shown. (

→P. 188)

While pressing the trip meter reset button, set the engine switch to
the “ON” position.

STEP

1

STEP

2

Advertising