Mercedes-Benz 2014 GLK Class - Manual (Page 225)

Text field : shows the selected menu or
submenu as well as display messages.
i You can set the time using the audio
system or COMAND, see the separate
operating instructions.
The following messages may appear in the
multifunction display:
Z
Shift recommendation
(
Y page 156)
CRUISE Cruise control ( Y page 173)
_ Adaptive Highbeam Assist
(
Y page 116)
¤ ECO start/stop function
(
Y page 148)
ë HOLD function ( Y page 183)
Menus and submenus
Menu overview
Operating the on-board computer
(
Y page 221).
Depending on the equipment installed in the
vehicle, you can call up the following menus:
R
Trip menu ( Y page 223)
R
Navi menu (navigation instructions)
( Y page 225)
R
Audio menu ( Y page 226)
R
Tel menu (telephone) ( Y page 227)
R
DriveAssist menu (assistance)
( Y page 228)
R
Serv menu ( Y page 230)
R
Sett. menu (settings) ( Y page 230)
The Audio , Navi and Tel menus differ slightly
in vehicles with an audio system and in
vehicles with COMAND. The examples given
in this Operator's Manual apply to vehicles
equipped with COMAND.
Trip menu
Standard display
X Press and hold the % button on the
steering wheel until the
Trip menu with
trip odometer : and odometer ; is
shown.
Trip computer "From Start" or "From
Reset"
Example: trip computer "From Start"
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
X Press the = or ; button on the
steering wheel to select the
Trip menu.
X Press the 9 or : button to select
From Start or From Reset .
The values in the From Start submenu are
calculated from the start of a journey,
whereas the values in the
From Reset
submenu are calculated from the last time the
submenu was reset (
Y page 224).
The From Start trip computer is
automatically reset if:
R
the ignition has been switched off for more
than four hours.
R
999 hours have been exceeded.
R
9,999 miles have been exceeded.
Menus and submenus
223
On-board computer and displays
Z