Mercedes-Benz 2014 GLK Class - Manual (Page 233)

Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instrument Cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Permanent Display: function.
You will see the selected setting Outside
Temperature or Additional
Speedometer [km/h] / Additional
Speedometer [mph] .
X Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
X Press the = or ; button on the
steering wheel to select the
Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Day Lights function.
If the Day Lights function has been
switched on, the cone of light and the
W symbol in the multifunction display
are shown in orange.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y page 113).
Setting the brightness of the display/
switch
X Press the = or ; button on the
steering wheel to select the
Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Brightness Display/Switches:
function.
You will see the selected setting.
X Press a to confirm.
X Press the : or 9 button to adjust the
brightness to any level from
Level 1 to
Level 5 (bright).
X Press the a or % button to save the
setting.
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the
Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Adapt. Highbeam function.
If the Adapt. Highbeam function has been
switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
X Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y page 116).
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
Menus and submenus
231
On-board computer and displays
Z