Lowering the vehicle, Tightening torque, Wheels and tires – Mercedes-Benz 2014 GLK Class User Manual

Page 360: Mounting a wheel

Advertising
background image

bolts to come loose. As a result, you could
lose a wheel while driving. There is a risk of
accident.
Never oil or grease wheel bolts. In the event
of damage to the threads, contact a qualified
specialist workshop immediately. Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving.

G

WARNING

If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip
over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.

Always pay attention to the instructions and
safety notes in the "Changing a wheel"
section (

Y

page 354).

Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety
reasons, Mercedes-Benz recommends that
you only use wheel bolts which have been
approved for Mercedes-Benz vehicles and the
respective wheel.

:

Wheel bolts for all wheels supplied by the
factory

;

Wheel bolts for the collapsible spare
wheel

!

Always use wheel bolts ; to mount the

collapsible spare wheel. Using other wheel
bolts to mount the collapsible spare wheel
could damage the brake system.

Be sure to use the original-length wheel bolts
when re-mounting the original wheel after it
has been repaired.

!

To prevent damage to the paintwork, hold

the wheel securely against the wheel hub
while screwing in the first wheel bolt.

X

Clean the wheel and wheel hub contact
surfaces.

X

Place the new wheel on the wheel hub and
push it on.

X

Tighten the wheel bolts until they are
finger-tight.

X

Inflate the collapsible spare wheel
(

Y

page 362).

Only then lower the vehicle.

Lowering the vehicle

G

WARNING

The wheels could work loose if the wheel nuts
and bolts are not tightened to the specified
tightening torque. There is a risk of accident.
Have the tightening torque immediately
checked at a qualified specialist workshop
after a wheel is changed.

!

Inflate the collapsible spare wheel using

the tire inflation compressor before
lowering the vehicle. The wheel rim could
otherwise be damaged.

358

Mounting a wheel

Wheels and tires

Advertising
This manual is related to the following products: