Stowage and features, Features – Mercedes-Benz 2014 GLK Class User Manual
Page 295
1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
You will be asked for your password.
The next time you are inside the vehicle and
you switch on the ignition, the
Doors
Locked Remotely
message appears in the
multifunction display.
USA only: alternatively, the vehicle can be
locked via:
R
the Internet, under the "Owners Online"
section
R
the telephone application (e.g. iPhone
®
,
Blackberry)
To do this, you will need your identification
number and password.
i
The vehicle remote closing feature is
available when the relevant mobile phone
network is available and data connection is
possible.
Stolen vehicle recovery service
If your vehicle has been stolen:
X
Notify the police.
The police will issue a numbered incident
report.
X
This number will be forwarded to the
Mercedes-Benz Customer Assistance
Center together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance
Center contacts you and the local law
enforcement agency if the vehicle is
located.
However, only the law enforcement agency
is informed of the location of the vehicle.
i
If the anti-theft alarm system is activated
for longer than 30 seconds, the Mercedes-
Benz Customer Assistance Center is
automatically informed.
Vehicle remote malfunction diagnosis
With the vehicle remote malfunction
diagnosis (Vehicle Health Check), the
Customer Assistance center can provide
improved support for problems with your
vehicle. During an existing call, vehicle data
is transferred to the Customer Assistance
center. The customer service representative
can use the received data to decide what kind
of assistance is required. You are then, for
example, guided to the nearest authorized
Mercedes-Benz Center or a recovery vehicle
is called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
center. You will see the
Roadside
Assistance Connected
message in the
COMAND display. If the vehicle remote
malfunction diagnosis can be started, the
Request for vehicle diagnosis
received. Start vehicle diagnosis?
message appears in the display.
X
Confirm the message with
Yes
.
X
When the
Vehicle Diagnosis Please
start ignition
message appears, turn
the SmartKey to position
2 in the ignition
X
When the
Please follow the
instructions received by phone and
move your vehicle to a safe
position.
message appears, follow the
customer service representative's
instructions.
The message in the display disappears.
If you select
Cancel
, the vehicle remote
malfunction diagnosis is canceled
completely.
The vehicle operating state check begins.
You will see the
Vehicle diagnosis
activated.
message.
When the diagnosis is completed, the
Send
vehicle diagnostics data//(Voice
connection may be//interrupted
during data transfer)
message appears.
Features
293
Stowage and features
Z