Seat belts, Warning and indicator lamps in the, Instrument cluster – Mercedes-Benz 2014 GLK Class User Manual
Page 263: On-board computer and displays
Display messages
Possible causes/consequences and M Solutions
Â
Key Not Detected
(white display
message)
The KEYLESS-GO key cannot be detected at present.
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
X
Operate the vehicle with the SmartKey in the ignition lock.
Â
Key Detected in
Vehicle
The KEYLESS-GO key has been detected inside the vehicle during
locking.
X
Remove the KEYLESS-GO key from the vehicle.
Â
Remove 'Start'
Button and Insert
Key
The KEYLESS-GO key can continuously not be detected.
KEYLESS-GO is temporarily malfunctioning or is defective. A
warning tone also sounds.
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Â
Close Doors to
Lock Vehicle
At least one door is open. A warning tone also sounds.
X
Close all doors and lock the vehicle again.
Warning and indicator lamps in the instrument cluster
Seat belts
Problem
Possible causes/consequences and M Solutions
ü
After starting the
engine, the red seat
belt warning lamp lights
up for 6 seconds.
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
X
ü
After starting the
engine, the red seat
belt warning lamp lights
up. In addition, a
warning tone sounds
for up to six seconds.
The driver's seat belt is not fastened.
X
The warning tone ceases.
Warning and indicator lamps in the instrument cluster
261
On-board computer and displays
Z