Mercedes-Benz 2013 E Class Coupe - Manual (Page 127)

Using the memory button
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side
exterior mirror
=
Adjustment button
?
Memory button M
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button
M ?.
X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
X Press memory button M ? and one of the
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X If the mirror moves out of position, repeat
these steps.
Calling up a stored parking position
setting
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side
exterior mirror
=
Adjustment button
?
Memory button M
X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X Adjust the exterior mirror on the front-
passenger side using button ;.
X Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button : for the exterior
mirror on the driver's side
Memory function
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
Memory function
125
Seats, steering wheel and mirrors
Z