Mercedes-Benz 2013 E Class Coupe - Manual (Page 148)

C
Switches the rear window defroster on/off ( Y page 153)
D
Switches climate control on/off ( Y page 148)
E
Sets the temperature, right ( Y page 151)
F
Sets the air distribution ( Y page 151)
G
Sets the airflow ( Y page 152)
H
Sets the temperature, left ( Y page 151)
I
Display
Information about using dual-zone
automatic climate control
Automatic climate control
The following contains notes and
recommendations on optimum use of dual-
zone automatic climate control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps above
the à and ¿ buttons light up.
R
Set the temperature to 72 ‡ (22 †).
R
Only use the "Windshield defrosting"
function briefly until the windshield is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or
when in a tunnel. The windows could
otherwise fog up, since no fresh air is drawn
into the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the
temperature settings on the driver's side
for the front-passenger side as well. The
indicator lamp above the á button goes
out.
R
Vehicles with COMAND: if you change the
settings of the climate control system, the
climate status display appears for
approximately three seconds at the bottom
of the screen in the COMAND display. See
also the separate COMAND operating
instructions. You will see the current
settings of the various climate control
functions.
ECO start/stop function
During automatic engine switch-off, the ECO
start/stop function only operates at a
reduced capacity. If you require the full
climate control output, you can switch off the
ECO start/stop function by pressing the ECO
button (
Y page 164).
146
Overview of climate control systems
Climate control