Mercedes-Benz 2013 E Class Coupe - Manual (Page 204)

Deactivating Steering Assist
X Deactivate the DISTRONIC PLUS with
Steering Assist function using the on-board
computer (
Y page 248).
The DTR+ Steering Assistant Off
message appears in the multifunction
display. DISTRONIC PLUS Steering Assist
is deactivated.
When DISTRONIC PLUS is deactivated,
DISTRONIC PLUS Steering Assist is
deactivated automatically.
HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R
when pulling away, especially on steep
slopes
R
when maneuvering on steep slopes
R
when waiting in traffic
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
Important safety notes
G WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
R
there is a malfunction in the system or in
the voltage supply.
R
the HOLD function has been deactivated by
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
R the electrical system in the engine
compartment, the battery or the fuses have
been tampered with.
R
the battery is disconnected
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
! If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes
automatically in certain situations. To
prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similar situations:
R
when towing the vehicle
R
in the car wash
Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary
R
the engine is running or if it has been
automatically switched off by the ECO
start/stop function
R
the driver's door is closed or your seat belt
is fastened
R
the parking brake is released
R
the transmission is in position D, R or N
R
DISTRONIC PLUS is deactivated
Activating the HOLD function
X Make sure that the activation conditions
are met.
X Depress the brake pedal.
X Quickly depress the brake pedal further
until ë: appears in the multifunction
display.
The HOLD function is activated. You can
release the brake pedal.
202
Driving systems
Driving and parking